WHInventoryInventory & Asset Management
WHINVENTORY / LEARNING CENTER

A clear guide to
your daily inventory.

Set it up. Track every handoff. Know what is on the shelf.
Step-by-step instructions, worked examples, and videos with sound.

19 chapters6 narrated tutorialsWeb · iPhone · iPad · Android
How to use this guide

Choose a chapter or search for an action. Videos play only when you press Play; turn up your device volume and use CC for captions. Every video has a text transcript. Controls can differ by your role and enabled modules. Recorded examples use sample data, with some earlier screen layouts; the written instructions explain the current workflow.

USER MANUAL#

1. Set up your workspace

Start with one company, a small set of locations, and a few real items. Test the workflow before loading all your inventory.

  1. Choose Create account on the sign-in screen. Enter your name, work email, a password of at least 10 characters, and your company name.
  2. Choose Electrical contractor, Wholesale distribution, or Blank as the starting template. Review the sample records before using them for live stock.
  3. Create the workspace and check the company name in the sidebar. Use the company selector when you belong to more than one company.
  4. In Studio, review Modules, Categories & fields, and Workspace. Set up your locations before adding items.
  5. Add one asset and one stock item, practice a receipt and a check-out, and check the movement history. Then invite your team.
Watch with sound · English synthetic narration · Captions available · 39 seconds
Read the video transcript

Welcome to Warehouse Manager. Let us set up your company workspace.

Enter your name, work email, and a password with at least ten characters. Use an account you can access later.

Give your company a recognizable name. Choose a starting template for your business, or select Blank to build your own setup.

Create the workspace, then confirm the company name in the sidebar. Review any sample items before using the workspace for real inventory.

The overview brings together stock, check-outs, and alerts. Next, review your locations and categories in Studio, and add a few items before inviting the team.

A practical first-day checklist

Decide how you name items, which unit you use for each stock line, and who is allowed to adjust quantities. Label a small area first. A consistent “Rack A-01 / Bin 02” naming scheme is easier to maintain than free-form descriptions.

Be careful with templates: choosing a template later under Studio → Workspace replaces the workspace contents. Export your data before doing this. Do not use template replacement to add a few new categories.

Back to contents ↑
USER MANUAL#

2. Assets, stock, and people

The category determines whether an item is tracked as an individual asset or as a quantity of stock.

  1. Use an asset category for a drill, laptop, vehicle, or meter that needs its own record and holder.
  2. Use stock for interchangeable materials such as gloves, cable, fittings, and consumables. Specify one unit consistently: each, pairs, feet, or boxes.
  3. Keep the difference between a person record and a user account clear. People can hold equipment; team members can sign in.
  4. Check the category before adding an item. The selected category controls the fields and quantity behavior.
Choose the right tracking model
ExampleTrackingWhat to record
Three serialized drillsAssetsThree individual records, each with its label and serial number
120 pairs of glovesStockQuantity 120, unit pairs, minimum such as 30
A technician without a loginPersonName and team under Workspace → People

Creating a person does not invite them or give them access to company data.

Back to contents ↑
USER MANUAL#

3. Read the overview

The Overview is your daily starting point. Its panels depend on enabled modules and your permissions.

  1. Check Items tracked and the split between assets and stock lines. A stock line is a record, not the sum of its units.
  2. Review Below minimum, Checked out, and Service due. Open the relevant items to decide what action is needed.
  3. Check Needs attention for rules raised by your workspace and Approvals for requests waiting for a decision.
  4. Use the Items filters to investigate a category, location, or status. Review recent movements to understand why numbers changed.

Inventory value uses recorded unit costs. It is not a live supplier price or a full accounting ledger. Cost visibility requires both the Costs & valuation module and permission to see costs. Service due includes dates in the next 14 days or already late.

An empty panel may mean there is no matching data; it does not automatically mean the app has failed.

Back to contents ↑
USER MANUAL#

4. Add and edit items

Create clear, searchable records before printing or scanning labels.

  1. Open Items → New item. Enter a specific name such as “Milwaukee M18 hammer drill”.
  2. Select Category and Location. Check the “Tracked as assets” or “Tracked as stock” hint before continuing.
  3. For stock, enter Quantity on hand, Unit, and Minimum. For assets, How many units creates separate records, one per unit; the form allows up to 50 at once.
  4. Enter Unit cost when available and complete category-specific fields. Fields marked required must have values.
  5. Choose Add item. Find the new record in Items and open it to verify its location, quantity, and label.
  6. To edit, open the item drawer. Change Name, Minimum, Unit cost, or custom fields as available. Detail edits save when the field changes or loses focus; watch the save status.
Watch with sound · English synthetic narration · Captions available · 40 seconds
Read the video transcript

Let us add an inventory item. Open Items and choose New item.

Enter a specific name, then choose the category. The category controls whether this is individual equipment or stock, and which custom fields appear.

Select where the item belongs. For stock, enter the quantity and unit. For assets, each unit gets a separate record.

Set a minimum if you want to track low stock. Fill in any required category fields, then save the item.

Open the new record and verify the details. Its label identifies this record. Use that code to find the item again; a supplier barcode is not automatically the same code.

Field examples

For cable: quantity 500, unit ft, minimum 100. For a meter: serial number, calibration date, and condition. A category can inherit fields from its parent, so a shared field may appear even when it was not added directly to the child category.

Use Receive, Use / issue, and Move for operational stock changes so there is a reason and history. If a button is absent, check your role and the relevant module.

Back to contents ↑
USER MANUAL#

5. Search, QR labels, and mobile scanning

Use the search box to find a name or an existing item code. A scan looks up an existing record; it does not create one.

  1. Click the top search box or use Command-K / Control-K. Type an item name or scan a label with a keyboard-style barcode scanner.
  2. For an exact item code, press Enter to open its record. Otherwise choose the appropriate search result.
  3. Open an item and find its Label section. Match the printed or displayed code to the item before attaching a label.
  4. In the native mobile app, use the camera scan control and allow camera permission when asked. Aim at a clear, well-lit label.
  5. On Android, the first scan may need the scanner module to install. Wait for setup, then try again.

No result? Check that you are in the right company, that the code matches the item SKU, and that the record already exists. A supplier barcode is not automatically mapped to your item. You can always type the item code instead.

Camera unavailable? Camera scanning requires the installed native app. Review the app’s camera permission in device settings. Browser use and a keyboard-style scanner remain separate workflows.

The app displays QR labels; this guide does not assume a dedicated label-printer integration or bulk print wizard. Check your actual print workflow before producing labels in quantity.

Back to contents ↑
USER MANUAL#

6. Organize locations and bins

Use locations to describe where stock or assets physically belong.

  1. Open Locations to inspect the location tree and its item counts.
  2. With permission to change structure, add a location using a recognizable name, code, type, and parent where appropriate.
  3. Create a hierarchy such as warehouse → zone → rack → bin; a vehicle can also be a location.
  4. Assign a location when adding an item. Use Move on an existing record to transfer it.
  5. Check the destination after moving an item and confirm the change in Movements.

Use unique, readable codes that your team can recognize on a shelf. Avoid renaming a location merely to represent a stock transfer: move the items instead. Do not remove a location until you have reviewed the items and child locations that depend on it.

Back to contents ↑
USER MANUAL#

7. Receive, issue, and transfer stock

Use explicit quantity movements instead of silently changing balances.

  1. To receive: open the stock item → Receive. Enter a positive quantity, choose a reason, and add a purchase order or delivery reference in Note.
  2. To consume or issue: open the item → Use / issue. Enter the amount leaving stock, select a reason, and identify the job or loss in Note.
  3. To transfer: choose Move, select the destination, enter the stock quantity, and add a note. For an asset, move the individual record.
  4. Confirm the action, then check the resulting quantity and location. Review Movements for the actor, reason, and time.

Worked example

Start with 100 pairs of gloves. Receive 20 pairs: the balance becomes 120. Issue 5 pairs to a job: it becomes 115. Moving 10 pairs to a van transfers stock between locations rather than recording consumption. Verify both locations after the transfer.

Enter quantities in the record’s unit. “2 boxes” is not the same as “2 each”. A checked-out asset must be returned before it can be moved through the normal item transfer control.

Back to contents ↑
USER MANUAL#

8. Check equipment out and back in

Check-outs apply to assets. Stock consumables use the issue workflow instead.

  1. Choose Check out from Overview, Check-outs, or an available asset’s detail drawer.
  2. Select the individual Item and the person in To. If the person is missing, add them under Studio → Workspace → People.
  3. Set Due back and include a job or note. Review any approval message before confirming.
  4. After confirmation, check the holder and due date in Check-outs. If approval is required, verify the pending request rather than assuming the asset is already handed out.
  5. When equipment physically returns, choose Return and check that it is available again.
Watch with sound · English synthetic narration · Captions available · 35 seconds
Read the video transcript

Check-outs track individual equipment assigned to people. Start by choosing Check out.

Select an available tool and the person taking it. Check the due date and add a job number or note.

If your workspace requires approval, review the request status before handing over the equipment.

After a successful check-out, verify the holder and due date. The record shows who has the tool.

When the actual equipment comes back, choose Return. Confirm that it is available again. Use stock issues, rather than check-outs, for consumable materials.

Only available assets appear in the check-out picker. Equipment already checked out or in service will not be available. An overdue date is a reminder to follow up; it does not automatically return the item.

Example: check out the individually labeled rotary hammer to a technician with Friday as the due date and a job number in the note. Return that same record when the tool is back.

Back to contents ↑
USER MANUAL#

9. Review approval requests

Rules can require approval for check-outs above a configured value.

  1. An admin defines the threshold and approver label in Studio → Rules.
  2. A user without approval permission submits the check-out request when the asset exceeds the rule threshold.
  3. An authorized approver reviews the request in Overview or the Approvals view in Check-outs.
  4. Check the item, recipient, and context before approving or declining. Verify the resulting status after your decision.

The approval permission is managed in Roles & access. A label in the rule’s Who field does not itself grant a user permission. Users who already have approval permission may complete the checkout directly. Keep unit costs accurate if you use value-based approval rules.

Back to contents ↑
USER MANUAL#

10. Count inventory by location

A cycle count compares what is physically present with the expected stock at one location.

  1. Open Cycle counts → Start a count and select the location.
  2. Count the actual units on the shelf. Enter the Counted value for each relevant line in the displayed unit.
  3. Enter zero when you have checked and found none. Do not use an empty field to mean zero.
  4. Review highlighted differences before posting. Investigate receipts, issues, or transfers made during the count.
  5. Choose Post count only after checking your entries. Posting corrects stock balances and records adjustments.
  6. Reopen the count or inspect Movements to verify the result.
Watch with sound · English synthetic narration · Captions available · 35 seconds
Read the video transcript

A cycle count checks one location at a time. Start a count and select the rack or bin.

Count the physical stock and enter the amount you actually find, using the unit shown for each line.

Enter zero if you checked and found none. An empty entry is not the same as a confirmed zero.

Review every difference. Check for deliveries, issues, or transfers that happened while you were counting.

Post only after reviewing the entries. Posting adjusts the stock balances and records the changes. Check the completed count and movement history afterward.

Example: expected 40, counted 37 gives a difference of minus 3. Verify the unit and bin before posting. Coordinate with the floor team so stock does not move unnoticed while you count. Starting a count is not a physical lock on the shelves.

Cycle counts requires the stock and count modules and permission to move/count stock.

Back to contents ↑
USER MANUAL#

11. Service and calibration

Track service dates and keep equipment in service out of normal circulation.

  1. Enable Service & calibration in Studio → Modules when your workflow uses it.
  2. Create or review the relevant date fields in Categories & fields, then fill them in on each item.
  3. Use the Service due overview panel and item status filters to find upcoming work.
  4. Open an available asset and choose Send to service. A checked-out asset should be returned first.
  5. After the work is completed, update its service or calibration date and choose Back in use. Verify the next date rather than assuming it was advanced automatically.

For reminder dates, use a Date field with a name such as “Inspection due”, “Next service”, or “Calibration due”. The current reminder logic recognizes date field keys containing due, next, service, or calib; a “Last service” field is not a next-due reminder.

Service reminders depend on recorded dates. They do not certify that an inspection took place or that equipment is safe to operate. Retain your maintenance evidence separately as required by your own procedures.

Back to contents ↑
USER MANUAL#

12. Customize modules, categories, and fields

Studio controls how the workspace is organized. Most setup controls require an admin or the appropriate structure permission.

  1. Open Studio → Modules and enable only the workflows your team uses. This changes the visible navigation and controls.
  2. In Categories & fields, choose a parent category or create a new category. Decide whether it tracks assets or stock.
  3. Add fields using Text, Number, Date, choice list, or Yes/No as offered by the form. Add a unit for numeric fields when needed.
  4. Use Required only when every relevant item can supply the value. For a choice list, enter the allowed options.
  5. Review inherited fields from parent categories. Add a sample item to confirm the resulting form.

Example: ladders

Create an asset category named Ladders. Add Height as a number with unit ft, Duty rating as a choice list, and Inspection due as a date. Use a parent category if the ladders should share its fields.

Disabling a module changes the workflow; it is not a substitute for deleting records. Removing a field hides it from the category; existing values are retained by the current implementation in case the field is added back. Review removal confirmations carefully.

Back to contents ↑
USER MANUAL#

13. Configure rules and alerts

Rules evaluate your workspace data and raise alerts or require approvals.

  1. Open Studio → Rules → Add rule. Give the rule a clear name.
  2. Choose When: low stock, overdue equipment, service due, or check-out value over the available threshold.
  3. Fill Value when the event requires days or dollars. Limit the rule to a category if appropriate.
  4. Choose Then and fill Who. Confirm the new rule is enabled.
  5. Check a matching item and the Overview or approval workflow to confirm the rule behaves as expected.

For example, set a low-stock alert for PPE after setting each item’s Minimum. An alert needs both a matching condition and an enabled rule.

Notification scope: treat these as in-app alerts. This guide does not promise that a rule sends an email, text message, or push notification. Check the app rather than relying on an external message.

Back to contents ↑
USER MANUAL#

14. Invite team members and set access

Invite users to sign in; create People records separately when you only need to track equipment holders.

  1. As a company admin, open Studio → Team. Enter the person’s work email.
  2. Select Admin, Manager, Warehouse staff, or Viewer. Review Roles & access because permissions can be customized.
  3. Choose Create invite link, then Copy link. Share the link privately with the intended person; the app does not automatically send an invitation email in this workflow.
  4. The recipient opens the link and follows the account/join steps using the invited email. Check Team afterward to confirm they joined.
  5. If an invitation expires, create a fresh one. Removing a member removes their company access; past activity remains in history.
Watch with sound · English synthetic narration · Captions available · 38 seconds
Read the video transcript

Company admins invite users from Studio, under Team. People records for equipment holders are separate from sign-in accounts.

Enter the intended team member’s work email. Choose a role, such as Warehouse staff.

Review Roles and access before assigning permissions. Role names can have customized permissions in your workspace.

Create the invite link, copy it, and share it privately with that person. This workflow does not automatically send an email.

The recipient follows the link using the invited email. Return to Team to verify they joined. If the link expires, create a fresh invitation.

Access controls to review
PermissionWhat it affects
Change structure / configure by AICategories, fields, locations, rules, modules, and AI setup changes
Edit itemsAdd, edit, and delete item records
Move stockReceive, issue, transfer, and count
Check out / approveEquipment handoffs and approval decisions
See costsUnit costs and inventory value

Role names are not a guarantee of a fixed permission set. The current Roles & access matrix is authoritative for your workspace. Never share one admin password with a whole team.

Back to contents ↑
USER MANUAL#

15. Use the AI assistant safely

Ask a question or describe a proposed change. The assistant uses your current company context and follows your permissions.

  1. Open Assistant and write a specific request, such as “Which items are overdue?” or “Add a Ladders category with height in feet”.
  2. Read the data-sharing prompt before sending. Continuing shares the request and the described workspace context with the configured AI provider; cancel if you do not want to share it.
  3. Read the answer and any Proposed changes. Check category names, quantities, locations, permissions, and warnings.
  4. Choose Apply change only if the proposal is correct. Choose Discard if it is not. A proposal by itself does not apply an inventory change.
  5. Inspect the updated items or setup. Use Activity to review the change; Undo targets the latest change, so review intervening work first.
Watch with sound · English synthetic narration · Captions available · 45 seconds
Read the video transcript

This example uses a scripted response and an earlier screen layout. Live suggestions may differ. In the current app, read and accept the data-sharing prompt before sending, or cancel to keep working manually.

Open the assistant and describe one clear change. Here, the request is to add a ladder category with custom fields and an inspection reminder.

Read every proposed change. Check names, fields, and rules. A proposal does not change inventory by itself.

Apply only when the plan is correct. Otherwise, discard it or revise your request.

Check the result in the app. Undo targets the latest change, so review recent activity first. Never include passwords or API keys in a request.

Use a precise request: “Set the minimum for cut-resistant gloves to 30 pairs” is better than “Fix stock”. Split unrelated changes into separate requests. AI suggestions can be wrong; verify them before applying.

The sharing prompt describes request text, relevant history, identity/role, and workspace data such as items, people, locations, and costs. Do not place passwords, API keys, or unrelated personal information in a request. Manual tools remain available if you decline AI sharing.

Recording note: the video demonstrates an example workflow with a scripted response and an earlier screen layout. The current app also requires the data-sharing step described above; live AI wording and proposals vary.

Back to contents ↑
USER MANUAL#

16. Review history, undo, and export

Use history to understand a change before trying to reverse it.

  1. Open Movements for stock receipts, issues, transfers, and adjustments. Inspect an item’s History for its recent movements.
  2. Open Studio → Activity to review who changed the workspace and whether the change came through the assistant or manual controls.
  3. Use Undo last change only after identifying the latest operation. In a shared workspace, another person may have made the latest change.
  4. Before significant setup changes, open Studio → Workspace → Export as JSON and save the downloaded file securely.

The export contains workspace data and may include commercially sensitive information. This is a JSON export, not an advertised CSV import or one-click restore workflow. Keep dated copies and do not assume an exported file can be automatically re-imported through the interface.

Undo is not a full backup system. It does not mean every account, billing, or membership action is reversible.

Back to contents ↑
USER MANUAL#

17. Account and company settings

Your company membership, workspace data, and personal sign-in account are separate concepts.

  1. Use the company selector at the bottom of the sidebar to switch companies. Always verify the company name before editing.
  2. Change the workspace name and accent in Studio → Workspace when you have setup access.
  3. Use the account button beside your name to review the account actions. Sign out using the adjacent sign-out control on a shared device.
  4. If you choose account deletion, read the confirmation and enter your password only in the app’s secure form. Resolve any ownership restrictions shown before proceeding.

Deleting your account is a consequential action. Do not use it to clear sample inventory or remove another team member. A platform owner cannot close their account through the normal deletion flow until ownership requirements are resolved.

Plan details appear in Studio → Billing. The native app does not provide purchasing controls. This manual contains no purchase link; contact your company admin for plan administration.

Back to contents ↑
USER MANUAL#

18. Troubleshooting and common questions

Start with the exact screen, company, and action that failed. Avoid repeating an operation until you know whether it saved.

  1. Missing menu or disabled button: check enabled modules and your role with an admin. A hidden cost may be a permission restriction.
  2. Item not found: clear filters, verify the selected company, and search the exact item code. A supplier barcode may not match an app label.
  3. Change not visible: inspect the save indicator, refresh once after checking connectivity, and review Activity or Movements before retrying.
  4. Assistant unavailable or provider error: keep using the manual controls, try later, and report the time and error text to support. Never send an API key.
  5. Invite does not work: verify the invited email, expiry date, and company; ask the admin for a fresh link.
  6. Mobile camera or launch issue: verify device permissions and installed app version, close and reopen the app, and report the device model, OS, app version, and steps that reproduce it.

What to include in a support report

Tell support what you were trying to do, the exact error, when it happened, and whether it repeats. Include a screenshot only after hiding personal information, inventory costs, and other confidential details. Never include passwords, invitation tokens, or payment details.

Can I work offline?

Normal account and inventory operations require a working connection to the server. Do not assume an offline screen has queued changes for later synchronization.

Why are there no items?

Check the company selector and filters first. An empty workspace can also be intentional. Do not load a template into an established workspace just to make the dashboard look populated.

Contact WHInventory

Sales, contact and support: 949-878-1122. You can also use the support form on whinventory.com. Never send passwords, verification codes or payment details.

Back to contents ↑
USER MANUAL#

19. Daily workflow and glossary

A short routine keeps inventory more reliable than occasional large corrections.

  1. At the start of the shift, review overdue equipment, low stock, service due, and pending approvals.
  2. As goods arrive or leave, record receipts and issues with reasons. Record transfers when the location changes.
  3. Check equipment out to a named person and return it when it is physically back.
  4. Count a small location regularly and investigate differences before posting.
  5. At the end of the shift, review recent movements and unresolved alerts. Keep a dated export before major changes.
SKU / item code
The identifier used to find an item record.
Asset
An individually tracked piece of equipment.
Stock line
A record whose quantity is tracked in a stated unit.
Minimum
The stock level used to identify low inventory.
Holder
The person assigned a checked-out asset.
Cycle count
A physical count for a selected location.
Proposed change
An AI-generated plan waiting for your review and application.
Back to contents ↑